Sản phẩm đã xem

APO DK-2861 - Touch Sensing Card Reader / Pin-Code Keypad

Đánh giá: rating Xem đánh giá (có 0 đánh giá) Xuất xứ: APO - AEI Giá bán: Liên hệ
Số lượng + -
Mô tả sản phẩm Thông số kỹ thuật Video Download Đánh giá

APO DK-2861 - Touch Sensing Card Reader / Pin-Code Keypad là thiết bị kiểm soát truy cập bằng mã PIN và thẻ RFID, kich thước rất mỏng và nhỏ gọn, có khả năng hoạt động độc lập hoặc kết nối với bộ điều khiển tạo nên hệ thống an ninh cao theo mô hình split-decoded. DK-2861 với bàn phím cảm ứng, khả năng chống nước tốt, thích hợp mọi môi trường lắp đặt và sử dụng. DK-2861 hỗ trợ dữ liệu theo dạng Wiegand Data Output.






  • Touch Sensing Back-lit Key Board
  • Weatherproof Surface Mount Housing
  • Operated with PINs & EM Cards
  • Wiegand Data Output Reader, Stand-Alone Keypad or Split-Decoded Keypad
  • DK-2861 & DK-2865 Have The same Features Except Employing Touch Keyboard Instead of Tact Switch Keyboard


The DK-2861 is the simplified version of the DK-2862. It is a self-contained dual relay outputs, weatherproof keypads, which combines the functions of digital keypad and proximity EM card reader in one unit. The DK-2861 is employing a Touch Sensing keyboard for code entry and is offered at a lower price than DK-2862.

The DK-2861 has been designed to work independently as a stand alone keypad or works together with an optional "APO Access Controller" to form a high security Split-decoded keypad system. It is also a card reader providing of 26 bits Wiegand data output from reading of an EM Card and 34 bits data output from the entry of an PIN/User Code. The Wiegand data can be used by consultants and end users when set product design or system installation criteria.

It is an ideal keypad mainly for Door Opening or Alarm Arm-Disarm Control. It can also be a programmable industrial timer (with the timing of 1 second to over 24 hours) for Automatic Operator Systems.
The keypad has the two output relays for output 1 (door lock contact) and Door Bell button.

A Popular Version, DK-2861(P) is available at lower cost, which keeps the key features for operating of electric door lock strike in access control. The features showing in Purple Color here are not available to the DK-2861(P).



  • Split-decoded or Stand Alone Operation
  • Stand Alone Electric Lock Installation
  • Users for Output 1 ¡V 1,000 (PINs and/or Cards)
  • 50 Visitor Codes for Output 1, Programmable for One Time; or Valid for 1 to 99 Hours
  • Over 100 Million Combinations for User PINs
  • Super User Code Operates The Output 1, Also Makes Inhibit or Resets Inhibit for Output 1
  • Wiegand Data Output for The Valid Entry of PINs (34 bits) & Reading of EM Cards (26 bits)
  • Sole Reader Mode Provides Wiegand Data Output for All PIN Entries & Card Readings
  • Data I/O Port for Linking-up with The APO¡¦s Access Controller, DA-2800 in Split-decoded Operation
  • Card Reader Compatible with All The Standard 125Khz Proximity EM Cards & Keyfobs
  • Programmable Intelligent Egress Button Controls ¡§Going Out¡¨ with Delay, Warning and Button Contacting Manners of Momentary or Holding Contact
  • Common User PIN, Group User PINs & Private User PINs for Working with The EM Card for Various Levels of Security Enhancement
  • ON-OFF Selectable for Pacifier Tone, Standby Flashing LED & Keyboard Back-lit Lighting
  • Output Relay 1 ¡V N.C. & N.O. Dry Contacts, 5A / 24VDC Maximum
  • Output Relay 2 ¡V N.O. Contact Only for Bell Button
  • Extremely Long Programmable Timer for Output Relays; 1 Second to Over 24 Hours
  • Tamper Switch ¡V N.C. Dry Contact; 50mA/24VDC
  • Operating Voltage Range : 12VDC Nominal; 11-15VDC
  • Operating Current : 50 (Quiescent) to 120mA (2 Relay Active)
  • Operation Temperature : -20 Deg C to +70 Deg C
  • Environment Humidity : 5-95% Relative Humidity, Non-condensing
  • Operation Environment & Ingress Protection : All Weather, IP-55
  • Weatherproof ABS Plastic Housing in Black Color
  • Back-lit Plastic Faceplate
  • Weight : 200gs
  • Dimensions : 127(H) X 75(W) X 40(D) mm