Sản phẩm đã xem

ScanVision 200/100 Máy kiểm tra mã vạch

Đánh giá: rating Xem đánh giá (có 0 đánh giá) Giá bán: Liên hệ
Số lượng + -
Mô tả sản phẩm Thông số kỹ thuật Video Download Đánh giá

The SV Series of scanner/verifiers by RJS provides both fixed position scanning and high-speed on-line ANSI method verification of linear bar codes. This unique instrument can be used for many types of bar code scanning and/or verifying applications.

The SV Series assures that bar code print quality is at an acceptable level.  It checks to make sure the print mechanism has not failed or gone out of adjustment during operation.  It even makes sure that the correct data is encoded and that the encoded data is in the proper format.

The SV Series analyzes and reports virtually every verification parameter known.  ANSI and Traditional print quality parameters are transmitted along with decoded data.  The reported symbol quality parameters ensure the print method or complete bar code process is optimized.  This is important for ISO corrective action procedures, label manufacturing and printing, tracking systems, ink jet applications and more                                

SV catalog PDF

The SV Series can operate as a fixed position scanner. But, since it also provides diagnostic bar code quality information, it can reduce system downtime and save material costs.  It does this by isolating the source of the problem.  Once the source of the problem is found, it can be corrected before non-readable bar codes are printed and material is wasted.

The diagnostic capability is also useful when installing the scanner or after a conveyor or printer maintenance cycle.  The available print quality information gives an indication of first time read rates, optimal scanner alignment, optimal conveyor speed and optimal printer settings and adjustments.  In short, everything that is needed to ensure proper set-up of a system.

■Scan Vision System            SV system catalog PDF

The SV Series uses a serial port to interface with RJSScanVision, a PC based software package used for set-up and monitoring.  Use ScanVision for SV setup while the scanner/verifier is off line and/or use it for real-time bar code quality analysis while the scanner/verifier is operating.  The unit also incorporates Model SV download language for setup without RJS ScanVision.

Five hardware outputs are available via an I/O-Power port for logic operation such as No Read, Poor Quality, Good Quality or Good Read status. Two synchronization inputs are also available for robust No Read evaluations. Two LED’s are available for status indications.

The serial port can also be used without ScanVision to provide decoded data and/or bar code analysis information to a host system.

                    Scan Vision System Description

 

 

MODEL

SV100 STANDARD
SV200 STANDARD
SV100C

Analyses/sec

100s/sec

200s/sec

100s/sec

Beam Width

152mm

63.5mm

267mm

Focus Distance

203mm

203mm

381mm

X dim (min)

0.17mm

0.17mm

0.33mm

MODEL

SV100HD
SV200-2

 

Analyses/sec

100s/sec

200s/sec

 

Beam Width

114mm

44mm

 

Focus Distance

152mm

152mm

 

X dim (min)

0.127mm

0.127mm

 

 

 

Symbologies: UPC/EAN, USS Code128, USS Code39, USS Interleaved2 of 5, USSCodabar, USS Code93

Operational Modes:Sync (edge and envelope), Freescan and ScanVision off line modes can be enabled

Package: 112 mm x 61 mm x 132 mm
Indications:5 LED ・Power/Sync, Calibration, Read, 2 programmable LED
Comm Port: D/SUB-9 male, RS 232C, Baud Rate: MAX 115200 baud
I/O-Power: D/SUB-15 male, 5 programmable outputs, 2 sync inputs
Voltage/Current: +5VDC/ 1 A
Mounting: Two (2) sets of mounting holes on two (2) different surfaces or a clamp for tightening to a 3/8" (9.5 mm) rod.